Customer Log In

Return to Storefront > 1 Gallon Per Stroke Manual Pumps

1 Gallon Per Stroke Manual Pumps

Edson One Gallon Per Stroke Manual Diaphragm Pumps are the most versatile of all manual utility pumps due to their size and capacity. They are used for the collection and transfer of waste liquids and pumping liquids with suspended solids. They are capable of handling liquids with large suspended solids without clogging, to prime from dry starts, and to run dry. These basic performance features combined with The One Gallon Per Stroke performance make them applicable to a very diverse list of applications. Choose the pump model that best meets your needs; then build your pump with the options selection buttons available for that model.

Model 165 Manual Portable Pump Kits are a complete pumping system. The Edson 30 gallon per minute Model 117 Lever-Action Side Inlet Pumps mounted on a Carrying Board, with quick clamp hose couplings, 20 feet of flexible hose, and a 32" Drive Handle makes up the kit.


Build Your Pump
Pump Material	Inlet and Discharge	Diaphragm Material (info)

Model 117 Lever Action Side Inlet Pumps are for horizontal mounting and portable applications. The pumps use a 32" handle to drive the diaphragm with an easy back and forth lever-action motion.


Build Your Pump
Pump Material	Inlet and Discharge	Diaphragm Material (info)

Model 554 Lever Action Side Inlet Pumps are identical to the Model 638 with the added feature of the offset drive for when vertical clearance is limited.


Build Your Pump
Pump Material	Inlet and Discharge	Diaphragm Material (info)

Model 557 Lever Action Side Inlet Pumps are identical to the Model 117 pumps with the added feature of the offset drive. This feature is useful when mounting the pump in an enclosure or behind a wall. It is also helpful when overhead clearance is limited.


Build Your Pump
Pump Material	Inlet and Discharge	Diaphragm Material (info)

Model 638 Lever Action Side Inlet Pumps are ideal for installations where the pump must be directly above the liquid to be transferred, such as on the top of a barrel, tank or floor openings. Material enters through the bottom of the pump and discharges to the side.


Build Your Pump
Pump Material	Inlet and Discharge	Diaphragm Material (info)

Edson International, Pump Division
146 Duchaine Blvd., New Bedford, MA 02745
Tel: 508 995 9711 Fax: 508 995 5021 Email: pumps@edsonintl.com

Home | Site Map

Online Shopping Guarantee